意大利 Elcontrol

STAR3

Energy and harmonics analyzer 高級電能儀表,諧波監察系統

Description


STAR 3 is a high quality 96x96mm panel energy analyser provides brilliant features at a price never reached before. The new bright red LCD display, the harmonic analysis, the wide set of measured parameters including the THD available in all the models, the multi-protocol capability of the RS485 port and the high accuracy class 0.5%, the 3 years-warranty period, allow to consider the STAR 3 the new state of art of the panel analysers market. It is a perfect, professional and low cost solution for the electrical panels, sub-metering systems, OEM applications, supervisory systems, Building and Factory automation systems.

The high flexibility of the instrument makes it adaptable to totally different applications. The models with harmonic analysis allows a permanent based control of one of the most important aspect of the power supply quality.

Such important possibility, up to now, was reserved only to high-cost device.

STAR 3 breaks this price barrier bringing, for the first time, the harmonic analysis into the market of the panel analysers.

STAR3電能和諧波分析儀

 

STAR3是一種高品質的帶有96×96面板的電能分析儀,這款分析儀以前所未有的低價,提供卓越的性能。STAR3是一種用於配電盤、輔助計量系統和OEM應用方面的完美、專業和低價解決方案。STAR3配備了一種專用的反顯LCD顯示器,這種顯示器具有LCD顯示器的優點和“傳統”LED顯示器的無與倫比的可見性。諧波分析、包括THD(所有型號都可測量)在內的大量測量參數、RS485埠的多協定能力、開關電源以及0.5%的高精確度等級,使STAR3不失為面板式分析儀市場上的最新技術水準的產品。

該型號配有(包含了)諧波分析功能,可以永久性地控制電源品質中最重要特性之一。迄今為止,只有昂貴的設備才配備如此重要的能力。STAR3打破了價格障礙,首次將諧波分析帶入了面板式分析儀市場。

 

66項測量

除了傳統分析儀所提供的所有典型資訊之外,Star 3還可監測各種附加參數,例如:

 

THD%(總諧波失真)是諧波失真的明顯標示。如無此種標示,諧波失真問題便會被隱藏起來。電流和電壓諧波會危及電氣裝置(電力變壓器、中性線、斷路器和功率因數校正設備)以及靈敏且昂貴的負載,例如IT負載。

 

該型號帶有全諧波分析(Harmonic Analysis,可進一步深入地檢查諧波波譜:清楚地以數位形式顯示高達第25階的電壓和電流諧波,從而可以直觀地評估失真的原因。

 

中線電流(Neutral Current)可以反映中性電纜的狀況,中性電纜常常會因為負載不平衡和諧波而超載。

 

電流的最大需求量(Maximum Demand)會清楚地告訴您電網各元件、電纜、斷路器、接觸器和母線等是否超載。

 

對於帶有輔助發電裝置的設施,輔助電能計量表(Cogeneration Energy Counter可以在所有四個象限上測量有功和無功電能的電量。

 

主要特點

 
  • 96×96毫米數字電能和諧波分析儀。
  • 真正的均方根值(RMS)測量。
  • 顯示52個專案的測量值;對於有諧波的型號,顯示202個專案的測量值。
  • 三角形或星形聯接的不平衡三相系統,兩相,單相。
  • 高精確度:電壓、電流和功率誤差<0.5%
  • 在暗背景LCD顯示幕上用明亮的背光顯示紅色數位。在任何照明條件下,即使從遠距離也都清晰可見。
  • 輔助電能計量表。
  • 每相的總諧波失真因數。
  • 報警、脈衝和模擬輸出。
  • 所有型號都有RS485通信埠。
  • 多協定儀器。
  • 簡單而又極為靈活的“設置(SETUP)”功能表,包括CTVT比選擇。
  • 設置和重新設置可用密碼保護。
  • 帶有三相諧波分析的型號,可分析高達第25階諧波和進行202項測量。
  • 開關電源(90伏到230伏交流或直流)。

 

  


可提供的型號:

STAR3基本型

可測量下表所列的所有參數。配備有多協議能力的RS485埠:Modbus RTUBCDIEEE)和Modbus ASCII。由於通信的重要性和元件成本較低,現在可以配備RS485埠作為缺省設備。即使你沒有興趣立即組建一個儀器網路,這種設備仍將一直保留,供未來開發使用。

 

STAR3 ALM和基本型一樣,再加上兩個繼電器輸出。輸出可以設置為發出報警信號或者產生脈衝,或者通過RS485埠予以搖控。“報警”功能可供幾種測量項目使用,包括伏(V)、安(A)、瓦(W)和總諧波失真(THD)。繼電器由最大和最小極限值觸發;滯後量和延遲時間可由擁護設定。所有設置值都可以通過鍵盤調整。如果在“脈衝”模式中使用,繼電器則產生與測量值成比例的脈衝。在這種情況下,性能也可以通過設置功能表進行調節。

在“搖控”模式下,繼電器的位置通過RS485線由外部主設備(PLCPC等)控制。這在甩負荷時是很方便的。

 

STAR3 4-20毫安培:和基本型號一樣,再加上0/4-20毫安培兩個模擬輸出。這兩個類比輸出是完全可以借助設置功能表進行配置的。用戶可以將測量項目與輸出聯繫起來,選擇0-20mA4-20mA作為輸出範圍,並設定所選測量項目的滿刻度值。

 

參數

TOT

L1

L2

L3

N

相線--中線電壓〔伏〕

§

§

§

§

 

相線--相線電壓〔伏〕

 

L1-L2

L2-L3

L3-L1

 

電流〔安〕

§

§

§

§

§

功率因數

§

§

§

§

 

頻率〔赫茲〕

 

§

 

 

 

平均電流〔安〕

 

§

§

§

 

最大需求電流〔I

§

§

§

§

 

有功功率〔千瓦〕

§

 

§

§

 

無功功率〔千乏〕

§

§

§

§

 

表觀功率〔千伏安〕

§

§

§

§

 

平均有功功率〔千瓦〕

§

 

 

 

 

平均無功功率〔千乏〕

§

 

 

 

 

平均表觀功率〔千伏安〕

§

 

 

 

 

最大需求有功功率〔千瓦〕

§

 

 

 

 

最大需求無功功率〔千乏〕

§

 

 

 

 

最大需求表觀功率〔千伏安〕

§

 

 

 

 

正(輸入)有功電能〔千瓦時〕

§

 

 

 

 

COG負(輸出)有功電能〔千瓦時〕

§

 

 

 

 

正無功電能〔千乏時〕

§

 

 

 

 

COG負無功電能〔千乏時〕

§

 

 

 

 

表觀電能〔千伏安時〕

§

 

 

 

 

電流Thd%

§

§

§

§

 

電壓Thd%

§

§

§

§

 

標準和規章

STAR3符合指令73/23/CEELVD)和2004/108/CEEMC)。其設計參照了EN 61010-1EN 61326及附錄A1/A2/A3EN 61000-6-2EN 61000-6-3EN 61000-3-2EN 61000-3-3EN 61000-3-3/A1EN 61000-4-2EN 61000-4-3EN 61000-4-4EN 61000-4-5EN 61000-4-5/A1EN 61000-4-6EN 61000-4-6/A1EN 61000-4-8EN 61000-4-8/A1EN 61000-4-11EN 61000-4-11/A1

 

 

STAR3 HARMO

Star3 ALM一樣,另加電壓和電流的三相諧波波譜。除了上表中的基本測量專案之外,這一型號還能顯示關於諧波波譜的完整資訊。

該儀器也能使用條形圖頁面顯示諧波。對於每一個諧波階k,可以得到下述數值:

 

諧波階

(在50赫茲下k=1-25,在60赫茲下k=1-20

L1

L2

L3

諧波電壓Vk

§

§

§

諧波電流Ik

§

§

§

 

諧波測量的精確度與基諧波的頻率完全無關。

該儀器可以測量高達1250赫茲的諧波,這在50赫茲基諧波情況下是第25階。如基諧波的頻率較高,可測階數會自動降低。

 

一般技術特性

 

外形尺寸(毫米):儀器96×96×115.4

斷路器範本:91×91毫米

電源:90230伏交流/直流(0400赫茲)+15%-20%5伏安)

顯示器:LED背光的反顯紅色LCD顯示器

伏特計輸入:VL1VL2VL3N相線中線電壓最交流350伏,相線對相線電壓交流600伏,35400赫茲

伏特計輸入阻抗:2兆歐

電壓輸入超載:相線中線電壓最高850

電流輸入:AL1AL2AL3COM5安。消耗1伏安。/要求5安外部電流互感器。

測量範圍:0-120%標稱電流

靈敏度:電流20毫安培;電壓10

過電流:能承受50安達1秒鐘

 

 

標度數:1種電壓標度,2種電流標度

測量值:T.R.M.S.(真有效值)高達第25階諧波=在50赫茲基諧波下1250赫茲

採樣頻率:2.5千赫茲

精確度:對電壓和電流,誤差<0.25%,對於功率<0.25%EN 62053-21

連接:單相或者三相星形、三相三角形或者兩相系統

儀器的重量:0.6千克

保護水準:儀器IP20,面板IP40

溫度範圍:-10到+50

相對濕度範圍(R.H.):20%90%

冷凝:無冷凝

繼電器輸出:最大250伏,最大交流120毫安培

 

 

 

尺寸(毫米)

 

 

Technical specifications


Maximum dimensions (mm): instrument: 96 X 96 X 115.4. Cut-out template: 91 X 91

Power supply: switching circuit from 90V to 230V ±15% AC/DC @  35-400 Hz (5 VA).

Display: reverse red LCD with LED backlight

Voltmeter inputs: VL1, VL2, VL3, N up to 350 V phase-neutral, 600 V phase-to-phase, 35-400 Hz

Voltmeter input impedance: 2 Mohm

Voltage input overload: max 850 V phase-neutral

Current inputs: AL1, AL2, AL3, COM., consumption 1 VA. Three or two 5A external curr.transf. required

Measuring range: 0-120% In

Sensitivity: current 20 mA ; voltage 10 mV

Overcurrent: withstand 50 amps for 1 sec.

Number of scales: 1 voltage scale, 2 current scales

Measurements: True R.M.S. up to 25th harmonic = 1250Hz with fundamental @50 Hz

Sampling frequency: 2.5 kHz.

Accuracy: <0.5% for Voltage and current and Power

Connection: Single phase or three phase star, three phase delta, or diphase systems

Weight: 0.6 Kg

Protection level: instrument IP20, front panel IP40

Temperature range: -10°C to +50°C

Relative humidity range: (R.H.): from 20% to 90%.

Condensation: non condensing.

Measures


 

L1

L2

L3

NEUTRAL

TOTAL

VLL

O

O

O

 

O

VLN

O

O

O

   

A

O

O

O

O

O

AVG A

O

O

O

   

MAX AVG A

O

O

O

   

KW

O

O

O

 

O

KVA

O

O

O

 

O

KVAR

O

O

O

 

O

AVG KW

       

O

AVG KVA

       

O

AVG KVAR

       

O

MAX KW

       

O

MAX KVA

       

O

PF

O

O

O

 

O

KWH IMP.

       

O

KWH EXP.

       

O

KVARH IND.

       

O

KVARH CAP.

       

O

THD I

O

O

O

 

O

THD V

O

O

O

 

O

HZ

O

       

Models


STAR3 Basic model

It shows all the measures listed in the above table. Includes an RS485 output with multi-protocol capability: Modbus RTU, Modbus IEEE and Modbus ASCII . The importance of the communication and the lower cost of the components allow today the inclusion of the RS485 port as a default features. Even if you are not interested in making a network of instruments, this possibility will always remain available for future developments.

STAR3 ALM:

as the basic model + two relay outputs. The outputs can be set be for either alarms signalling or pulses or remote relay control . The function "alarm" can be associated with several measures including V,A,W,THD and harmonics. Each relay has a maximum and a minimum threshold, the histeresys and the delay time. All the settings can be adjusted. If used in "pulse" mode the relays generates pulses proportional to the associated measures. Also in this case the behaviour is adjustable from the setup menu. In "remote control" the position of the relay is decided by an external master device ( PLC, PC, etc) through the RS485 line . This is very convenient for load shedding applications.

STAR3 4-20mA:

as the basic model + two analogue outputs 4-20 mA or 0-20 mA.

STAR3 HARMO:

as Star3 ALM + three phase harmonics spectrum for voltage and current.

In addition to the basic measures of the above table, the harmonics model displays complete information about the spectrum. For each harmonic order k the voltage and current phase values are available. The accuracy of harmonic measurements is totally independent from the fundamental frequency.

Star3 measures harmonics up to 1250Hz, which corresponds to the 25° order if the fundamental frequency is 50Hz. If the frequency of the fundamental is higher than 50Hz, the number of available harmonic orders is automatically decreased.

SWITCHING POWER SUPPLY 
all models have switching-type power supply. This permits to supply the instrument with an AC or DC voltage in the 90V to 230V range. This  is very useful for particular applications (for example UPS supply) or for reducing the number of products to be kept in stock.

 

Detailed PDF Catalogs 詳細PDF資料

PageTop

 

** 常備現貨 歡迎查詢 **